登录 添加会员 求助
 
Albest Industrial Co.,Ltd.
 
 
Recommended Results 
 
LED display Alcohol Detector Fuel cell Alcohol sensor 

  产品分类 : 機械與設備->測量機->酒精濃度測試計

     
LED display Alcohol Detector Fuel cell Alcohol sensor
         

  产品规格
 
Model No:    Mars
  Country  CN
  Brand  Albest
  Minimum Order  10pcs
  Payment Term  TT by bank
  Western Union  Paypal

 

  产品描述
   
  1. Instrument Overviews

Mars breathalyzer is an instrument used for testing the concentration of alcohol of the expired breath from a human subject. It adopted advanced fuel cell alcohol sensor, with excellent sensitivity and wonderful repetition. Test procedure is controlled by AI-designed microcomputer. Work flow is reasonable, simple, convenient and functional. The backlit LCD digital display is direct-view and clear. This device will automatic alarm and real-time display the concentration of alcohol when alcohol concentration from your breath is exceed the preset value.





2. Main Specifications

Type of Sensor Fuel cell alcohol sensor

Working voltage DC3V(2 AAA)

Working current ≤30mA

Used environment Working temperature:0oC to 40oC Relative humidity:< 95%

Test response time ≤5S

Detection range 0.00mg/100mL to 400mg/100mL

Accuracy 100mg/100mL:±5%

Display Blue backlight LCD 4 digital display





3. Operating Instructions

A> Battery Installation:

A-1 Remove the cover of battery compartment at the back of device.

A-2 Insert 2 “AAA” alkaline batteries according to correct polarity, then close battery compartment cover.

B> Start:Press power button at least 2 seconds, with a short beep tone, backlit lights lit and display 0018 (or other value) that represents the tested times so far, press button less 3 seconds to display the test value of last time.

C> Blow:Display the moving value “0” and “blow”, please blow continuously for 3 seconds via mouthpiece. The device can automatically detect along with beep sounds when blowing, and display “----” that shows data analysis is in processing after blowing. It will automatically power off if no blowing action taken place in 2 minutes.



D> Result display:Several seconds later data analysis finished, the displayed value is the concentration of alcohol.



E> Re-measure: Press button again for the next test.



F> Power off:

F-1 After finishing the test or during the test, hold down the button at least 2 seconds to turn off the device.

F-2 If forgetting to turn off the device after finishing the test, the device will automatically turn off after 1 minute.

F-3 When the device displays current test times and last test result, hold down the button at least 2 seconds, it will be a alert of wrong operating(This error will not cause equipment damage). Stop pressing the button immediately, device will automatically return to normal status.





4. Notes

4.1 Prevent the device fall from a height or by severe vibration;

4.2 If measurement is operated under lacking pressure symbol appeared, the measured value may be a slight deviation from the actual value.

4.3 In order to reflect the blood alcohol concentration in truth, please test 10 minutes later after drinking.

4.4 The device shall not be stored or used under the environment contains corrosive gas (such as chlorine).





5. Common Errors and Troubleshooting

Errors Reason Troubleshooting

No any display on LCD Incorrect Batteries installed Install batteries according to correct polarity

Exhausted batteries Change new batteries

Circuit errors Return to repair

No response Exhausted batteries Change new batteries

Sensor failure Change sensor

Pump does not work Change new batteries first, if it still does not work, then change pump.

   


[ 返回产品型录 ]

Commerce 会员:
请登录您的帐号跟口令,系统将为您填入您的相关资料
 
 
帐号:
口令:
 记住我的帐号
 
 
填写下列表格并寄送询问函．所有的询问信函将会自动寄发给你想联络的公司
主題
內容 （ 请勿输入公司名称、Email、电话、传真、网址 ）
   

 


公司简介:
* 公司名称
*E-mail
*国家
*联络人
网址
*电话
 - -
传真
 - -
*邮递区号
*城市
*街道地址
*企业形态
 批发商   出口商 进口商 制造商
大盘商 零售商  代理商 Retrofitter 使用者
其他, 请详细说明:
*安全口令
请输入所显示的安全口令


网站导览 l 隐私权政策 l 服务团队 l 合作提案 l 联络我们 l 帮帮我 l 广告刊登l  B2B商业伙伴
    .