公司介绍 – Lyna Manufacturing Inc.

添加会员

求助

Lyna Manufacturing Inc.

回首页

公司简介

产品橱窗

影音视听

寄出询问函

联络我们

	Recommended Results

公司介绍

Tire Lyna Simply Out Performs…

Tire Lyna is a quality tire casing gel with an environmental conscience and applied science for commercial and industrial new and retread tire casings.

Tire Lyna is available in the following applications:

Tire Lyna Spray Gel

Tire Lyna spray gel is sprayed evenly throughout the entire casing with an air operated spray gun before the tire is mounted. Once coated the tires can go into service or stored for several months. Tire Lyna spray gel clings to the casing liner and protects the casing from vent leaks, heat and oxidation damage and helps tires maintain their pressure over thousands of miles.

Tire Lyna Injection Gel

Tire Lyna injection gel is pumped in to the tire before mounting on the rim or it can be pumped through the valve stem (core removed) with an air operated or a hand pump (sold separately). Once the correct amount is applied the gel evenly coats the entire casing within a few miles of drive time. As the tires warm up the gel will work through the inner bead and stop bead leaks. Once the gel has coated the entire casing area it does not pool to the bottom. Large section repairs are easily made simply by pushing aside the gel. Tire Lyna injection gel maintains tire pressure, stops vent leaks and bead leaks, continually self seals punctures up to ½ an inch and while protecting the casing from heat and oxidation damage it also absorbs water vapor making the tires run a lot cooler. Tire Lyna injection gel is engineered as a total casing management solution.

Tire Lyna Rim Flange Gel

Tire Lyna rim flange gel is engineered for pitted and rusty rim flange area and is pre-applied to the rim flange before mounting the tire. Once the tire is mounted and aired; it gives the tire bead a really good seal eliminating slow leaks. Adding Tire Lyna injection gel will give the seal extra insurance.

Ever wonder what is the most integral part of that black round rubber thing that moves your equipment? “CASING” the whole foundation of the tire will depend on the integrity of its casing.

The foundation of a tire will depend on the integrity of its casing. This is the body (or carcass) of the tire ... the "foundation" upon which everything is built. In the first place, the casing is an element that allows the tire to guarantee its principal task, i.e., to support the load. When the tire is inflated, the air is injected at a pressure in relation to the volume of the tire, which makes it possible to support the load weighing on the tire. The purpose of the casing is to contain air under pressure and consequently the load. Finally, it's the casing that transmits the vehicle's torque stresses to the tread, which is in contact with the ground, resisting considerable longitudinal stresses to transmit the motive torque and the braking torque, which tend to separate the cables that compose it.

Call us toll free and we will assist you with the Tire Lyna formula best suited for your equipment.

Call us toll free (877) 847-3596 or