产品信息 - Ruby Tiped coil winding nozzle(wire guide nozzle)->electronic industry

添加会员

求助

Kimchen industry co..LTD

回首页

公司简介

产品橱窗

影音视听

寄出询问函

联络我们

	Recommended Results

Ruby Tiped coil winding nozzle(wire guide nozzle)

产品分类 :

機械與設備->電子、電力、電氣機械->電子工業

Ruby Tiped coil winding nozzle(wire guide nozzle)

产品规格

Country	CN
Brand	KC
Packing	20pcs/box
Minimum Order	20pcs
Payment Term	T/T

产品描述

Ruby tiped coil winding nozzle is used on coil winding machines and cable machines for wire guide.it is made of stainless stee and ruby by precise processing and combination.The rigidity of ruby is above than level 9 and is just less than that of diamond.It is a single crystal and can be made with high brightness and cleanness. It can effectively protect paint film and ling-term continual work.
Features:
1. High Wear Resistance
This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing.

2. Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.

3. Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.

4. Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.

Specification:
Measurements:
Customize available by requested, outside diameter is governed by nozzle wall thickness. See the measurements drawing to confirm your nozzles measurements according to your winding machine and coil products.

Processing limit: D1≥ 0.2mm, D1≥ 0.7mm.
Sapphire Nozzles（Ruby nozzle）
Outside diameter: 0.60 ~ 20.00mm, tolerance: 0.004 ~ 0.03mm
Inner diameter: 0.04 ~ 12.00mm, tolerance: 0.003 ~ 0.10mm
Length: 0.40 ~ 15.00mm, tolerance: 0.02 ~ 0.10mm
Taper: Custom design, tolerance: +/-3°
Surface roughness: Rz0.05~Rz0.2
We offer other specifications and special products according to your requirements.

其他类似产品