1. A dialog window with picture description.
2. Special repaired frames to quicken the maintenance speed.
3. Close-loop design of digital feedback on three axes of the machine significantly increases positioning precision and ORBIT-CUT machining accuracy and efficiency.
4. Simple operation interface.
5. Common function keys are located on the operational panel for direct use.
6. Hot key setting.
7. ATC (automatic tool change) and C-axis 360° index can be installed; the process of coarse machining to ultra-fine machining can be completed at one time.
8. Dialogue diagram provides various hole-expanding modes such as quick search of edge, centers and datum marks.
9. Rich color graphic (the same resolution as a PC screen).
10. Automatic multi-step machining (coarse, medium coarse, medium fine, fine, superfine)—up to 10 steps.
11. Unlimited number of machining conditions can be saved as machining archives. Each set of machining conditions can be edited, modified or stored. They are easy to edit and easy to find.
12. Automatic origin search and multi-point coordinate memory capability.
13. 1/2 design capability, ARC automatic discharge waveform detection and automatic adjustment.
14. Automatic center position detection, automatic compensation, search of hole center and deepest point; fixed hole machining (cyclic mode, independent mode), which is suitable for different machining conditions; Radial, circular, square, linear (vector), coning, 45° hole-expanding machining.
15. Three-axis beeline, two-axis arc, three-axis helix.
16. Chinese/English versions interface, metric/British system switch and Z-axis quick up, quick down, slow up and slow down capability.
17. Lateral machining, three axes, six directions (plane rotation).
18. All alarms describe the source, date and exact time of problem occurrence.
20. Optical scale is applied for close-loop position control, enabling extreme position for machining.
21. Automatic editing—settings can be done according to type of material, work piece size, machining depth, one side die clearance, final current and rate of electrode wear.
22. CNC models possess conventional capability of consistent level of energy discharge, achieving stable and rapid machining and smooth high quality on machining surface while the rate of electrode wear is still low.
23. Monitor page indicates machining path and orbital pattern in use.
III. Controler Type
power supply
Unit
E30
E50
E75
E100
E150
E200
Max.Machining current
30A
50A
75A
100A
150A
200A
Meral removal rate
(mm3/min)
250
400
600
850
1250
1600
Power input
3KVA
4.5KVA
6.5KVA
8KVA
16KVA
22KVA
Min.Electrode ware
0.20%
0.20%
0.20%
0.40%
0.60%
0.70%
Best surface finishing
0.2
0.2
0.3
0.5
0.7
0.7
N.W.
kgs
200
200
300
330
450
480
packing size (LxWxH)
mm
620x740x1820
620x740x1820
620x740x1820
620x890x2000
620x1140x2000
620x1140x2000
